GarBro
Concrete Placing Equipment
|
BACK |
"G" Series General Purpose Concrete Buckets
The standard bucket for placing a wide range of concrete by the general
contractor.
SPECIFICATIONS |
GARBRO G SERIES CONCRETE BUCKET |
"R" Series Lightweight Round-Gate Concrete Buckets
30% to 40% lighter than the standard bucket, this bucket is ideal for the
general contractor. Pictured with optional side chute.
SPECIFICATIONS |
GARBRO R SERIES CONCRETE BUCKET |
"L" Series Lightweight Laydown Buckets
A lightweight laydown bucket with the ability to handle a large capacity
at a low loading height.
SPECIFICATIONS |
GARBRO L SERIES LAYDOWN BUCKET |
Extended Gate Lightweight Laydown Buckets
A laydown bucket with a side discharge feature.
SPECIFICATIONS |
GARBRO EXTENDED GATE LAYDOWN BUCKET |
Combo Buckets
Featuring a double clamshell gate with vertical front discharge, fork
pockets and a selection of side chutes for a variety of uses.
SPECIFICATIONS |
GARBRO COMBO CONCRETE BUCKET |
Rock Hoppers
A heavy-duty hopper that facilitates the placing of bedding material on
utility jobs.
SPECIFICATIONS |
GARBRO ROCK HOPPERS |
Roofers Buckets
A lightweight bucket designed for the placing of chat by the roofing
contractor.
SPECIFICATIONS |
 }
GARBRO ROOFERS BUCKET |
Heavy Duty Laydown Buckets
A bucket that combines a low loading height with a large capacity for
placing low slump concrete
SPECIFICATIONS |
GARBRO HD LAYDOWN BUCKET |
Model "A" Low Slump Buckets
A heavy-duty bucket that reliably handles large aggregate, low slump
concrete, and features air-operated discharge gates.
SPECIFICATIONS |
GARBRO MODEL A LOW SLUMP BUCKET |
Model "D" Low Slump Buckets
Same as Model "A" above except manual gate operation. Not pictured.
SPECIFICATIONS |
GARBRO MODEL D LOW SLUMP BUCKET |
Automatic Bucket Hooks
The automatic hook is for use on large, multiple bucket operations where
fast hook-up is important.
SPECIFICATIONS |
GARBRO AUTOMATIC BUCKET HOOKS |
Low Slump Cableway Buckets
These buckets are designed for use with a cableway, but may also be used
with a crane. The Bucket remains attached to the lifting device and is
generally charged with a transfer car. The buckets feature large double
clamshell gates and the GarBro patented Venturi throat for fast, complete
discharge of the concrete. Gate operation may be hydraulic or pneumatic.
SPECIFICATIONS |
GARBRO LOW SLUMP CABLEWAY BUCKET |
Wide Flange Receiving Hoppers
A special hopper that can be attached to the entire range of 14-inch-wide
flange columns to place floor slabs in multi-story buildings once the
steel is in place.
SPECIFICATIONS |
GARBRO WIDE FLANGE RECEIVING HOPPERS |
Precaster's Buckets
This bucket's extra-wide gate is used for pouring pre-cast forms, slabs,
etc.
SPECIFICATIONS |
GARBRO PRECASTER'S CONCRETE BUCKET |
Barrel Loading Hoppers
This hopper, equipped with manual or air-operated gate's, is designed to
minimize labor in the loading of wet or dry materials in standard
55-gallon drums. Engineered for hazardous waste and environmental cleanup
projects. SPECIFICATIONS |
GARBRO BARREL LOADING HOPPERS |
Bond Beam Buckets
A specialized bucket used to pour columns, walls and nearly any placement
challenge.
SPECIFICATIONS |
GARBRO BOND BEAM BUCKETS |
Forklift Hoppers
A hopper used for distributing materials such as grout and concrete with a
forklift
SPECIFICATIONS |
GARBRO FORKLIFT HOPPERS |
Bin Gates
These discharge gates are available in standard sizes to fit most bins and
silos. Special sizes can be built to meet specific job requirements.
Double clamshell gate pictured.
SPECIFICATIONS |
GARBRO BIN GATES |
Vertical Front Receiving Hoppers
These hoppers allow for temporary storage of concrete and other materials.
Available with single or double discharge gates. Not pictured.
SPECIFICATIONS |
GarBro Vertical Front Receiving Hoppers
|
Vertical Front Floor Hoppers
Floor hoppers facilitate the loading of concrete carts and wheelbarrows.
Available with single or double discharge gates.
SPECIFICATIONS |
GarBro Vertical Front Floor Hoppers |
Center Discharge Receiving Hoppers
Storage hoppers with the discharge gate in the center of the hopper.
Available with single or double discharge gates. Not pictured.
SPECIFICATIONS |
GarBro Center Discharge Receiving Hoppers |
Center Discharge Floor Hoppers
To facilitate loading of motorized carts, the discharge gate is located in
the center of the hopper so the operator can conveniently reach the gate
handle. Available with single or double gates.
SPECIFICATIONS
|
GarBro Center Discharge Floor Hoppers |
Wheelbarrows
There a variety of rugged wheelbarrows designed for placing concrete and
other heavy work. Wheelbarrows available are
wood handled,
steel handled,
two wheeled, and
foundry/industrial.
SPECIFICATIONS |
GarBro Wheelbarrows |
Concrete Carts
These carts are the best and most efficient way to manually place
concrete. SPECIFICATIONS |
GarBro Concrete Carts |
Dolly Chassis with 400 x 18 Tires
There are 1,000 uses for this frame and wheel assembly which allows
conversion to fit loads such as lengths of pipe, poles, lumber, bales and
boxes.
SPECIFICATIONS |
GarBro Dolly Chassis with 400 x 18 Tires |
Oxy-Acetylene Tank Carts
A durable and safe way to move gas bottles. Available in two models. Fore
and aft shown
SPECIFICATIONS |
GarBro Oxy-Acetylene Tank Carts |
